Rotary Table RTSA-130
 Click to enlarge |
Aperture 32 mm Load 150 Kg Motors: Stepper or Servo/encoder |
RTSA Series motorized rotation stages provide precision angular positioning accuracy combined with high load
capacity. There are three stage sizes with center aperture from 20 mm to 60 mm available, optimizing load
capacity, torque, speed and resolution for a variety of operating conditions. Tappered roller bearings allow for off center
loads in a reduced footprint. The single monolithic design offers improved stiffness without
compromising dynamic performance. Precise rotation is ensured by bevel gear design with gear reducers to offer multiple
choices of gear ratios. RTSA stages are driven by the stepper motors or servo motors with incremental or abslolute multi-turn encoders.
Rotary tables RTSA Series can be offered in these variants:
without gear reducer
with in-line gear reducer
with 90 degrees right angle reducer
RTSA-130-03 (SHOWN WITHOUT GEAR REDUCER AND WITHOUT MOTOR)
GEAR RATIO 3:1
RTSA-130-GR (SHOWN WITH GEAR REDUCER AND WITHOUT MOTOR)
GEAR RATIO GR = 9, 15, 30)
 Rotary Table RTSA-90 Rotary stage RTSA-90 $0.00 |
 Rotary Table RTSA-130 Rotary Table RTSA-130 $0.00 |
Rotary Table RTSA-200 Rotary Table RTSA-200 $0.00 |
|
PARAMETER / MODEL
|
Unit |
|
RTSA-130 |
|
|
Bearing |
|
TAPERED ROLLER BEARING |
||
|
Hollow shaft |
mm |
20 |
32 |
60 |
|
Table size |
mm |
85 |
130 |
200 |
| Gear ratio (motor/table) (note 1) |
3, 9, 15, 30 | 3, 9, 12, 15, 30 | 5, 15, 25, 50 | |
|
Max torque |
Nm |
30 |
65 |
110 |
|
Max speed motor shaft side |
rpm |
2000 |
||
|
Repeatability (Unidirectional) |
arc-sec |
20 |
||
|
Reversal Value (Hysteresis) |
arc-min |
1 |
||
|
Axial load |
kg |
30 |
150 |
300 |
|
Off-center moment load |
Nm |
150 |
400 |
650 |
|
Axial run-out |
microns |
15 |
||
|
Parallelism |
microns |
20 |
||
|
Stage weight |
kg |
3 |
8 |
22 |
|
Motor |
|
Stepper motor, Stepper motor with encoder Servo motor with encoder (incremental 4000 and 10,000 cpr and absolute multiturn 17/16 bits) |
||
| Translated resolution | typ 5-20 arc-sec dependent on the motor type, encoder, motor drive and gear ratio |
|||
|
Protection |
|
IP40 |
||
