Linear actuator IDK28-100-SLIDE
-600x600.jpg "Linear actuator IDK28-100-SLIDE") Click to enlarge |
Stroke 100 mm Length 180 mm WxH 28x45 mm Force 70 N |
Motorized precision actuators offer up to 100 mm travel range. Precision motion is accomplished by a miniature stepper motor providing sub-micron resolution. Precision fine pitch screw mechanism converts rotation of the motor shaft into linear travel while avoiding backlash inside the system. This provides very responsive motion with trust force of 70 N and low friction. These actuators are offered in multiple travel ranges with limit switches at both ends of the travel.
- Stepper motor driven
- Motorized screws design
- moving slide
- Built-in limit sensors
.jpg)
 Linear actuator MLA-MS00 MLA-MS00 $0.00 |
 Linear actuator MLA-CMA06 MLA-CMA06 $0.00 |
 Linear actuator MLA-CMA28 MLA-CMA28 $0.00 |
 Linear actuator MLA-CMA20 MLA-CMA20 $0.00 |
 Linear actuator MLA-CMA42 MLA-CMA42-50 $0.00 |
-120x120.jpg "Linear actuator IDK28-60ST") Linear actuator IDK28-60ST IDK28-60ST $0.00 |
Linear actuator IDK28-100ST IDK28-100ST $0.00 |
-120x120.jpg "Linear actuator IDK28-60-SLIDE") Linear actuator IDK28-60-SLIDE IDK28-60-SLIDE $0.00 |
| Parameter | Unit |
IDK28-100-SLIDE |
|
Stroke |
mm |
100 |
|
Screw lead |
mm | 2 |
|
Repeatability |
micron | 20 |
|
Motor (note 1) |
|
Stepper Nema 11 |
|
Speed (note 2) |
mm/sec | 40 |
|
Load |
N | 30 ...70 (note 1) |
|
Limit switches |
2 | |
|
Stage weight |
kg | 0.5 |
Note 1: Load and drive voltage dependent
Note 2:
Max load 3 kg when load is on the slide front
Max load 7 kg when load is on the slide rear
Max load 5 kg in vertical trust
Max load 7 kg in horizontal trust
