LINEAR
ACTUATOR for your motion automation task.
This page serves as an index to all linear
actuator technologies available from IntelLiDrives
A
linear actuator is an actuator that creates linear motion (as opposed to
rotary motion, e.g. of an electric motor (from Wikipedia).
Direct drive
linear actuator with linear motors and mechanical bearings.
A Direct
drive mechanism takes the power coming from a motor without any
reductions, such as a gearbox.
A
linear motor is an electric motor that has had its stator and rotor
"unrolled" so that instead of producing a torque (rotation) it produces
a linear
force along its length (from Wikipedia).
Moving
carriage linear actuators
|
Linear actuator model LSS-120
Direct drive linear motor (servo), Peak force 450 N, continuous force
150 Nm, Travel stroke up to 2m, Linear encoder resolution 1 micron
more info |
Linear actuator model LSS-160
Direct drive linear motor (servo), Peak force 450 N, continuous force
150 Nm, Travel stroke up to 3m, Linear encoder resolution 1 micron
more info |
Linear actuator model LSS-200
Direct drive linear motor (servo), Peak force 450 m, continuous force
150 Nm, Travel stroke up to 5m, Linear encoder resolution 1 micron
more info |
|
Linear actuator model LSSE-110
Direct drive linear motor (servo), Peak force 300 m, continuous force
100 Nm, Travel stroke up to 2 m, Linear encoder resolution 1 micron
more info |
|
|
|
Linear actuator model LSM-BB-5
Direct drive linear motor (stepper), Force 25N, Travel stroke up to 1m,
Positioning resolution 1 micron
Positioning repeatability 2 microns
more info |
Linear actuator model LSM-BB-8
Direct drive linear motor (stepper), Force 40N, Travel stroke up to 1m,
Positioning resolution 1 micron
Positioning repeatability 2 microns
more info |
Linear actuator model LSM-BB-5
Direct drive linear motor (stepper), Force 55N, Travel stroke up to 1m,
Positioning resolution 1 micron
Positioning repeatability 2 microns
more info |
Direct drive
linear actuator with linear motors and air bearings.
Air bearings are bearings which solely
support the bearing's loads on a thin layer of
gas or air (from Wikipedia).
Actuator
is propelled by the linear stepper motor,
|
Linear actuator model LSM-AB-20
Direct drive linear motor (stepper), Force 100N, Travel stroke up to 1m,
Positioning resolution 1 micron
Positioning repeatability 2 microns
more info |
Linear actuator model LSM-AB-30
Direct drive linear motor (stepper), Force 150N, Travel stroke up to 1m,
Positioning resolution 1 micron
Positioning repeatability 2 microns
more info |
Moving shaft (moving rod) linear actuators
|
Linear actuator models IT 2504-2510
Direct drive linear servo motor, Continuous force 50 to 100N, Travel
stroke 27 to 309 mm, Positioning resolution 5 micron, Positioning
repeatability 10 microns
more info |
Linear actuator models IT 3804-3810
Direct drive linear servo motor, Continuous force 140 to 280N, Travel
stroke 27 to 309 mm, Positioning resolution 7 micron, Positioning
repeatability 14 microns
more info |
|
Voice coil linear motor linear actuators
A
voice coil (consisting of a former, collar and winding) is the coil of wire
attached to the apex of a loudspeaker cone. It provides the
motive
force to the cone by the reaction of a magnetic field to the current passing
through it. The term is also used for similar actuators,
commonly
used as the positioning actuator in the disk read-and-write head of computer
hard disk drives
(from Wikipedia).
|
Linear actuator models LA-75-25
Direct drive linear servo motor voice coil type, Continuous force 12N,
Travel stroke 10 mm, Positioning resolution 1 micron, Positioning
repeatability 1 microns
more info |
Linear actuator models LA-100-45
Direct drive linear servo motor voice coil type, Continuous force 45N,
Travel stroke 16 mm, Positioning resolution 1 micron, Positioning
repeatability 1 microns
more info |
Linear actuator models LA-260-80
Direct drive linear servo motor voice coil type, Continuous force 80N,
Travel stroke 25 mm, Positioning resolution 1 micron, Positioning
repeatability 1 microns
more info |
Linear actuator models LA-450-160
Direct drive linear servo motor voice coil type, Continuous force 160N,
Travel stroke 25 mm, Positioning resolution 1 micron, Positioning
repeatability 1 microns
more info |
Ball screw linear actuator
A ball
screw is a mechanical linear
actuator that translates rotational
motion to linear motion with little friction.
A
threaded shaft provides a helical raceway for ball
bearings which act as a precision
screw. As well as being able
to apply
or withstand high thrust loads, they can do so with minimum internal friction.
They are made to close
tolerances and are therefore suitable for use in situations in which high
precision is necessary. The ball assembly
acts as
the nut while the threaded shaft is the screw
(from Wikipedia).
|
Linear actuator model BSMA-058
Ball screw lead 2.5 mm, Travel stroke 300 mm, Repeatability 5 microns,
Load capacity 20 Kg, Servo or stepper motor
more info |
Linear actuator model BSMA-080
Ball screw lead 5 and 10 mm, Travel stroke 600 mm, Repeatability 5
microns, Load capacity 50 Kg, Servo or stepper motor
more info |
Linear actuator model BSMA-110
Ball screw lead 10 and 20 mm, Travel stroke 1,500 mm, Repeatability 5
microns, Load capacity 80 Kg, Servo or stepper motor
more info |
Linear actuator model BSMA-136
Ball screw lead 10, 20 and 25 mm, Travel stroke 2,000 mm, Repeatability 5
microns, Load capacity 100 Kg, Servo or stepper motor
more info |
Lead screw linear actuators
A
leadscrew (or lead screw), also known as a power screw
or translation screw, is a screw designed to translate
turning motion
into linear motion. Common applications are machine slides (such as in
machine tools). Leadscrews are
manufactured in the same
way as other thread forms. A lead screw can be used in conjunction with
split nut (from Wikipedia)
|
Linear actuator model LSMA-184
Compact 21 mm height. Screw lead 0.25 mm, Travel stroke 13 mm, Repeatability
2 microns,
Load capacity 5 Kg, Servo or stepper motor
more info |
Linear actuator model LSMA-173
Compact 30 mm height. Screw lead 0.25 mm, Travel stroke 20 and 50 mm, Repeatability
2 microns,
Load capacity 5 Kg, Servo or stepper motor
more info |
Linear actuator model LSMA-200
Screw lead 0.5 mm, Travel stroke 100 mm, Repeatability 2 microns,
Load capacity 40 Kg, Servo or stepper motor
more info |
Linear actuator model LSMA-175
Screw lead 0.5 mm, Travel stroke 50, 100, 150, 200 mm, Repeatability 2 microns,
Load capacity 8 Kg, Servo or stepper motor
more info |
Linear actuator model LSMA-167
Wide 90 mm linear actuator, Screw lead 0.25 and 0.5 mm, Travel stroke 25
mm, Repeatability 2 microns,
Load capacity 20 Kg, Servo or stepper motor
more info |